full color water-proof cabinet 4K Video Wall Processor for super
marekt usage 3 years warranty
1, High -contrast: Adopting independent design of front mask to
avoid hydrops & dust stratification:optimizing sawtooth surface to
enhance diffuse reflection and improve the contrast of LED display.
2, wide viewing angle:Horizontal viewing angle can be up to120
degree.It is still colorful from any angle within 120 degree,with
no color patches.
3, High gray scale: Adopting 16 bit gray scale processing
technology to restore the natural image.Using S-PWM driving
technology to improve gray grade,meet the 16 bit high gray display
requirements under low brightness.
2. point by point calibration: adopting the point by point calibration
technology of brightness and chrominance to ensure the uniformity
of led display brightness and color.
Stability and Reliability
1. High Protection: Adopting three proofing ,IP level reaches
IP65-IP68 ,works well in severe environment.
2. Good heat dissipation:Detaching the power heat and driving heat to
reduce the harmful effect to the LEDs from power heat.Mounting AC
fan inclined with huge air output to increase the cooling
uniformity.
3. High reliability: adopting static scanning and modular design
technology,to realize high stability and reliability.
4. Easy to install and Maintain: Quick positioning and
installation,front ,back and single point maintenance are optional.
the detailed specification of outdoor led display as follows.
| LED Cabinet | Cabinet Size | 960MM X960MM |
| S Resolution | 96pixels *96pixels |
| Cabinets Material | iron cabinet |
| LED Display | Pixel Density | 10000pixels/sq.m |
| Drive IC | ICN |
| Power Supply | Series connection |
| Brightness | 5500cd/sqm |
| Display Color | 16.7million |
| Viewing Angle | 110°(Horizontal),50°(Vertical) |
| Best Viewing Distance | 10m~100m |
| Max Power Consumption | 750 w/sq.m |
| Average Power Consumption | | | 450 w/sq.m |
| Weight | 35kgs/sq.m |
| Refresh Rate | 1920hz |
| Input Voltage | AC220V/50H or AC110V/60H |
| Output Voltage | DC5V,40A |
| Grey Scale Levels | 16bit |
| Display Colors | R(1024) x G(1024) x B(1024) |
| MTBF | 10,000 hours |
| Life-span | 100,000 hours |
| Protection Level | IP65 |
| Failure percentage of leds | | | less than 0.0003 |
| Working Temperature | -25℃~65℃ |
| Drive Mode | 1/4 scan |
| Working Humidity | 10%~99% |
| Specification | Drive method | module size | pixel | Pixel composition | Point density | Cabinet size / length and width |
| P3.91die cast aluminum(SMD) | 1/8 scan | 250*250mm | 64*64 | 1R1G1B | 65410 | 500*1000MM |
| P3.91iron cabinet(SMD) | 1/8 scan | 250*250mm | 64*64 | 1R1G1B | 65410 | 1000*1000MM |
| P4(SMD)die cast aluminum | 1/8 scan | 256*128MM | 64*32 | 1R1G1B | 62500 | 512*512MM |
| P4(SMD) | 1/8 scan | 256*128MM | 64*32 | 1R1G1B | 62500 | 768*512MM |
| P4.81die cast aluminum(SMD) | 1/13scan | 250*250mm | 52*52 | 1R1G1B | 43222 | 500*1000MM |
| P5(SMD) | 1/8 scan | 320*160MM | 32*32 | 1R1G1B | 40000 | 960*960MM |
| P5(SMD)die cast alumiunm | 1/8 scan | 320*160MM | 64*32 | 1R1G1B | 40000 | 640*640MM |
| P5.95(SMD) die cast aluminum | 1/7 scan | 250*250mm | 42*42 | 1R1G1B | 28246 | 500*1000MM |
| P6(SMD) | 1/8 scan | 192*192MM | 32*32 | 1R1G1B | 27778 | 960*960MM |
| P6(SMD)die cast aluminum | 1/8 scan | 192*192MM | 32*32 | 1R1G1B | 27778 | 576*576MM |
| P6.67(SMD)die cast alumium | 1/8 scan | 320*160MM | 48*24 | 1R1G1B | 22478 | 640*640MM |
| P8(SMD) | 1/4 scan | 256mm*128mm | 32*16 | 1R1G1B | 15625 | 1024mm*768mm |
| P8(SMD)die cast aluminum cabinet | 1/4 scan | 320mm*160mm | 40*20 | 1R1G1B | 15625 | 640mm*640mm |
| P10(DIP) | 1/4 scan | 160mm*160mm | 16*16 | 1R1G1B | 10000 | 960mm*960mm |
| P10(SMD) | 1/4 scan | 320mm*160mm | 32*16 | 1R1G1B | 10000 | 960mm*960mm |
| P10(SMD) | 1/2 scan | 320mm*160mm | 32*16 | 1R1G1B | 10000 | 960mm*960mm |
| P10(SMD)die cast aluminum | 1/4 scan | 320mm*160mm | 32*16 | 1R1G1B | 10000 | 640mm*640mm |
| P16(DIP) | Static full color | 256mm*256mm | 16*16 | 1R1G1B | 3906 | 1024mm*1024mm |
| P20(DIP) | Static full color | 320mm*160mm | 16*8 | 1R1G1B | 2500 | 1280mm*960mm |
Stability and Reliability
1. High Protection: Adopting three proofing ,IP level reaches
IP65-IP68 ,works well in severe environment.
2. Good heat dissipation:Detaching the power heat and driving heat to
reduce the harmful effect to the LEDs from power heat.Mounting AC
fan inclined with huge air output to increase the cooling
uniformity.
3. High reliability: adopting static scanning and modular design
technology,to realize high stability and reliability.
4. Easy to install and Maintain: Quick positioning and
installation,front ,back and single point maintenance are optional.
